Hurst Manufacturing
 |
STEPPING MOTORS: LSD & LSG Series (Replaces AS & ABS Series) |
| PERMANENT MAGNET STEPPING MOTORS | |
Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax
|
STEPPING MOTORS: LSD & LSG Series (Replaces AS & ABS Series) |
| PERMANENT MAGNET STEPPING MOTORS | |
Unlike many motors of similar size and appearance, LSD & LSG Series motors are designed for long life at rated loads. Geared models feature a die cast gear housing, hardened steel gears and pinions running on ground, hardened steel studs. No plastic or fiber parts are used.Click here for gear train construction details. LSD & LSG motors are widely used in precision instruments, medical equipment, computer peripherals and other applications requiring high quality components.
NOTES
1. Mounting holes and shaft distance fit standard pear-shaped gear cup motors.
2. Standard lead wire configuration is 6 leads.Click here for standard lead wire color code and switching sequence.
3. LSD & LSG Series motors can be driven with theHurst Stepping Motor Controllers.
4. Motor is also available with a round gear housing as shown in above picture.
| Direct Drive Stepping Motors | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Part Number |
Voltage VDC |
Resistance Ohms/Phase |
Inductance m H/Phase |
Hold Current A |
Total Watts Input W |
Minimum Holding Torque gf-cm (oz-in) |
Pull-Out Torque @175p/s gf-cm (oz-in) |
Detent Torque gf-cm (oz-in) |
Rotor Inertia gf-cm2 (oz-in2) |
Weight g (oz) |
Length (L) mm (in) |
| Stepping Motor Selection Table | |||||||||||
LSD35