|
Miniature power connector, in accordance with DIN 49455 and CEE 22 standards. Designed for low profile applications ie., laptop and notebook computers. |
42R51 ![](42R51a.gif)
|
Specifications |
Mechanical |
Material: | |
Housing: | P.B.T. |
Pin: | Brass |
Plating: | |
Pin: | Nickel |
Solder: | Silver |
Electrical Specifications |
Rating: | 125 VAC 3A 12 VDC 1A |
![](Ul.gif) ![](vde.gif) ![](csa.gif) ![](sev.gif) ![](semko.gif) ![](nemko.gif) ![](demko.gif) |
Contact Resistance: | 30 Megaohm Max |
Insulating Resistance: | 100 Megaohm min. @ 500 VDC |
Withstanding Voltage: | Primary AC 4,000V/minute |
Operating Life: | 5,000 cycles insertion/withdrawal |
|
Example & Ordering Code |
![](42R51f.gif) |
![](42R51b.gif) | ![](42R51c.gif) Cross Section |
![](42R51d.gif) Panel Cutout | |
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5123 Printed Circuit![](42R5123a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
PC Pins: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) ![](csa.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
![](42R5123b.gif) | ![](42R5123c.gif) |
![](42R5123d.gif) Cross Section (A-A) | ![](42R5123e.gif) PCB Layout |
![](42R5123f.gif) | |
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5124 Printed Circuit![](42R5124a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
PC Pins: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) ![](semko.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
![](42R5124b.gif) | ![](42R5124d.gif) PCB Layout |
![](42R5124c.gif) Cross Section | ![](42R5124f.gif) Panel Cutout |
![](42R5124e.gif) | |
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5125 Side Flange/Solder![](42R5125a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
Terminals: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) ![](csa.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
![](42R5125b.gif) | ![](42R5125c.gif) |
![](42R5125d.gif) Cross Section (A-A) | |
![](42R5125e.gif) | ![](42R5125f.gif) Panel Cutout |
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5126 Side Flange/Solderl![](42R5126a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
PC Pins: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
![](42R5126b.gif) | ![](42R5126c.gif) |
![](42R5126d.gif) Cross Section | ![](42R5126e.gif) PCB Layout |
![](42R5126f.gif) | ![](42R5126g.gif) Panel Cutout |
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5127 Side Flange/Printed Circuit![](42R5127a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
PC Pins: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5128 Snap in/Solder![](42R5128a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
Terminals: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) ![](semko.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
![](42R5128b.gif) | ![](42R5128c.gif) Cross Section |
![](42R5128d.gif) Panel Cutout | ![](42R5128e.gif) |
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5131 Side Flange/Solder![](42R5131a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
Terminals: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-5131RA Snap In/Printed Circuit![](42R5131f.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts | |
PC Pins: | |
Material: | Brass |
Plating: | Tin |
Electrical Specifications |
Rating: | 2.5A 250 VAC 70°C |
![](Ul.gif) ![](vde.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
|
Specifications subject to change without notice. Dimensions in mm. |
|
Miniature IEC inlet connectors are designed for small electronic and electrical appliances where panel space is limited. Available in screw and snap-in panel mount with solder and PC Pin terminals. IEC 60320 standard C6 and C8 conforms with all international safety requirements and accordance with DIN 49455 standards. |
42R51-1122 Side Flange/Solder![](42R5122a.gif)
|
Specifications |
Material and Finish: |
Housing: | |
Material: | P.B.T. |
Rating: | UL 94V-0 |
Contacts: | |
Terminals: | |
Plating: | Brass |
Solder: | Tin |
Electrical Specifications |
![](Ul.gif) ![](vde.gif) |
Insulation Resistance: | 100 Megaohm min. @ 500 VDC |
Dielectric Strength: | 2000 VAC for 1 minute |
|
![](42R5122b.gif) | |
![](42R5122c.gif) Cross Section | |
![](42R5122d.gif) | ![](42R5122e.gif) Panel Cutout |
|
Specifications subject to change without notice. Dimensions in mm. |