Beckwith Electronics


Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax

Contact Us

ICC Capacitors

General Purpose
Large Can With 3rd Lead Support
-40°C to +85°C

 Standard ProfileLow Profile
SeriesPD-TPL-T
ConfigurationRadial LeadRadial Lead
Voltage Range6.3 - 250VDC10 - 100VDC
Capacitance Range100 - 33000MFD1000 - 10000MFD
Tolerance+20%+20%
Leakage Current0.02CV or 2MA0.02CV or 2MA




Horizontal Deflection
For TV and Monitors
-40°C to +85°C

 Standard Profile
SeriesPHD
ConfigurationRadial Lead Miniature
Voltage Range250VDC
Capacitance Range1.0 - 10MFD
Tolerance+20%
Leakage Current100uA




Timing Circuit
Close Tolerance, Low Leakage
-40°C to +85°C

 Standard Profile
SeriesPLT
ConfigurationRadial Lead Miniature
Voltage Range10 - 50VDC
Capacitance Range1.0 - 2200MFD
Tolerance+10%
Leakage Current0.001CV or 1uA




General Purpose
-40°C to +85°C

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PDC Radial Lead Miniature 6.3 - 450VDC 0.1 - 15000MFD +20%
-10%
+50%		 100VDC or less: 0.1CV or 3uA
160 - 250VDC: 0.01CV or 20uA
315 - 450VDC: 0.01CV or 30uA
TDC Axial Lead Miniature
PSS Radial Lead Subminiature
PRM Radial Lead Super Subminiature
PDW Solvent Proof Radial Lead Miniature
Low Profile
PDS Radial Lead, 7mm High 4 - 50VDC 0.1 - 100MFD +20% 0.01CV or 3uA
PEM Radial Lead, 5mm High




Vertical Synchro
For TV and Monitors
-55°C to +105°C

 Standard Profile
SeriesPTV
ConfigurationRadial Lead Miniature
Voltage Range16 - 50VDC
Capacitance Range.047 - 470MFD
Tolerance+20%, +10%
Leakage Current0.002CV + 1uA




Wide Temperature Range
-40°C to +105°C

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PDB Radial Lead Miniature 6.3 - 250VDC 0.1 - 10000MFD +20%
+10%		 100VDC or less: 0.1CV + 3uA
160 - 250VDC: 0.01CV + 20uA
TDB Axial Lead Miniature
PUB Solvent Proof Radial Lead Miniature
Low Profile
PUM Radial Lead, 7mm High 6.3 - 50VDC 0.1 - 100MFD +20% 0.01CV or 3uA




Low Leakage
-40°C to +85°C

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PD-L Radial Lead Miniature 6.3 - 100VDC 0.1 - 2200MFD +20%
+10%		 0.002CV or 0.4uA
TD-L Axial Lead Miniature
PLE Epoxy Seal Radial Lead Miniature
Low Profile
PDS-L Radial Lead, 7mm High 4 - 50VDC 0.1 - 220MFD +20% 0.002CV or 0.4uA
PML Radial Lead, 5mm High




Low Impedance, Low ESR
For Switching Power Supplies
-55°C to +105°C

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PUF Radial Lead Miniature 6.3 - 63VDC 1 - 6800MFD +20% 0.002CV or 2uA
PDF Radial Lead Subiniature 0.01CV or 3uA
PMF Radial Lead Super Subiniature
Low Profile
PUM Radial Lead, 7mm High 6.3 - 50VDC 0.1 - 100MFD +20% 0.01CV or 3uA




Non-Polarized
-40°C to +85°C

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
NPD Radial Lead Miniature 10 - 50VDC .047 - 1000MFD +20% 0.03CV + 3uA
NTD Axial Lead Miniature
Low Profile
PMB Radial Lead, 7mm High 6.3 - 50VDC 0.1 - 100MFD +20% 0.03CV + 3uA




High Ripple
For Switching Power Supplies
-40°C to +85°C

 Standard ProfileLow Profile
SeriesPLS-HSPSL-HL
ConfigurationSnap-In MountSnap-In Mount
Voltage Range160 - 250VDC160 - 250VDC
Capacitance Range150 - 1000MFD150 - 1000MFD
Tolerance+20%+20%
Leakage Current0.02CV or 2MA0.02CV or 2MA




Power Supply
-40°C to +85°C*

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PLP Lug Mount 6.3 - 450VDC 22 - 47000MFD -10%, +50% 6.3-80VDC: 0.04CV + 30uA or 2MA
100-450VDC: 0.04CV + 160uA or 2MA
PLL PCB Pin Mount
* All units except 450VDC, which is -25°C to +85°C




Non-Polarized
Audio Crossover
-40°C to +85°C

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
NPA Radial Lead Miniature 25 - 50VDC 1 - 100MFD +20%, +10% 0.004CV + 10uA
NTA Axial Lead Miniature




Switching Power Supply
Low ESR, High Ripple
-40°C to +85°C*

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PST Snap-In Mount 16 - 450VDC 47 - 47000MFD +20% 0.02CV or 2MA
PWS Smaller than PST
PFS Smaller than PWS
PHS Smaller than PFS
Low Profile
PSL Snap-In Mount 16 - 450VDC 47 - 47000MFD +20% 0.02CV or 2MA
PWS Smaller than PSL
PLS Smaller than PWS
PHS Smaller than PLS
* All units except 450VDC, which is -25°C to +85°C




Switching Power Supply
Low ESR, High Ripple, Extended temperature
-40°C to +105°C*

Standard Profile
Series Configuration Voltage Range Capacitance Range Tolerance Leakage Current
PRT Snap-In Mount 10 - 450VDC 10 - 47000MFD +20% 0.02CV or 2MA
PSU Smaller than PRT
Low Profile
PRL Snap-In Mount 10 - 450VDC 10 - 47000MFD +20% 0.02CV or 2MA
PSF Smaller than PRL
* All units except 450VDC, which is -25°C to +105°C




Other ICC Capacitors

Our film, ceramic disc and dipped tantalum capacitors are designed and manufactured with the same care as our aluminum etectrolytics. Here is a brief description of their characteristics. For detailed information, fill out the postage paid card or call.

Polyester Film

EM Series (Radial Lead Subminiature) capacitors are perfect where small size and economical cost are critical. They also offer capacitance stability over the temperature range and a low dissipation factor.

PMG Series (Radial Lead) and YM Series (Axial Lead) capacitors provide a broad range of non-inductive wound metalized units with the best volumetric efficiency of all film capacitors. And they are highly reliable due to the self-healing qualities of the metalized dielectric. PMG and YM capacitors also exhibit capacitance stability and low dissipation factor.

PMT Series (Radial Lead) and YMT Series (Axial Lead) capacitors provide a broad range of non-inductively wound film/foil units exhibiting similar qualities to the previously mentioned film capacitors.

Polypropylene Film

PMP Series (Radial Lead) and YMP Series (Axial Lead) capacitors are non-inductively wound metalized capacitors for high current, high frequency switching and high frequency AC filter applications where very low dissipation and ESR are essential. They are also used for high impedance coupling, A-D converters, sample and hold applications and in tuning and timing circuits.

PP Series (Radial Lead) and YP Series (Axial Lead) capacitors are film/foil units exhibiting the same qualities as the PMP and YMP Series.

Ceramic Discs

CDT Series (Radial Lead) capacitors are class 1 temperature compensating types with predictable linear variation over a wide temperature range for use in Hi-Q temperature compensating circuits. Various lead forms are available.

CDH Series (Radial Lead) capacitors are class 2 types with temperature stability for economical general purpose applications. Various lead forms are available.

CDS Series (Radial Lead) capacitors are class 3 types designed for a variety of semiconductor applications. Their unique semiconductor design offers maximums in capacitance while retaining the miniature size required by state-of-the-art design engineers. High-insulation resistance, minimum dissipation factors and operating stability provide the design engineer with unparalleled advantage. Various lead forms are available.

Epoxy Dipped Solid Tantalum

DP Series (Radial Lead) capacitors are small and economical with excellent features including high surge capability, high component sensitivity, rugged construction, reliable long- term stability and wide temperature range.

DP-L Series (Radial Lead) capacitors are specified where extremely low leakage is required.

A HISTORY OF EXCELLENCE

Since the early part of the twentieth century, when our company was founded, our commitment to excellence has been unremitting. That's why, today, each ICC capacitor is designed and manufactured to provide the ultimate in quality and precision. And, with our extensive range of products offered, that means you can choose the specifications and mounting you require without having to compromise with alternatives. What's more, all of this is available to you at remarkably competitive prices. So, the next time you specify capacitors, make the ICC product line an integral source of supply. We invite you to fillout the postage paid reply card for samples, specifications and pricing.






Packaging


Tape & Reel Radial (P/T)
Tape & Reel Axial (T/R)


Cut & Form (CF)
Straight Cut Lead (C/L)

Snap-In Cut & Form (CS1)
Snap-In Cut & Form (CS2)

Snap-In Cut & Form (CS3)

Reel Packing
Ammo Packing