Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

BlockMaster


Specifications

Features:
  1. PSM is green in color with clamp in the open position.
  2. PEM is black in color with clamp in the closed position.
  3. Double captive screws.
  4. Elevator clamp style.
  5. Testing holes/points.
  6. 2 and 3 position single mold.
  7. Up to 30 positions modular.
  8. Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
  9. Positions are contacts per row, not total contacts.
  10. All PSM/PEM and MSM/MSE blocks can be interlocked to form custom configurations.
  11. Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
  12. Minimum 5 microns of tin plating on terminal for easy soldering.
PSM (PEM) Series

PSM260H1


26 Positions
H Series
Marking 0
5mm Spacing

Electrical
Current:17.5A @300V
Wire range:17 to 30 AWG
Wire section (mm2):0.05 to 2.5mm2
Pin dimension:1mm x 0.8mm
CR:<15m ohms
IR:>109 ohms (500V DC)
Operating temp:-40°C to+110°C
Stripping length:5.5mm
Torque:0.5Nm
PCB holes:min 1.4mm
PCB thickness:max 2.8mm
Climactic category:40/110/21 Acc. to IEC 68-1
Materials
Housing:Polyamide 6, 6 (UL94V-0)
Clamp:Copper Alloy, Ni plated
Terminal:Copper Alloy, Tin plated
Screw:M3, copper alloy, Ni plated
Colors Available:Green, black

Marking
Adhesive marking strips 5 and 5.08mm centers.
NumberedOrder Number
1-10ESA14000110
11-20ESA14001120
21-30ESA14002130
31-40ESA14003140
41-50ESA14004150

Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
0 = no printing
A = upside down printing (consecutive #'s R to L)
B = regular printing (consecutive #'s L to R)
Custom markings are welcome with minimum order.
Contact BECKWITH ELECTRONICS for more information.

Selection Table and Drawings