Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

BlockMaster


Specifications

Features:
  1. MSM is green in color with clamp in the open position.
  2. MSE is black in color with clamp in the closed position.
  3. Double captive screws.
  4. Elevator clamp system.
  5. Testing holes/points.
  6. 2 to 12 position single mold.
  7. 2 to 30 position modular.
  8. Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
  9. Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
  10. Minimum 5 microns of tin plating on terminal for easy soldering.
MSM(MSE) Series

MSE16A91


16 Positions
Right Angle
Marking A
5mm Spacing

Electrical
Current:17.5A @250V
Wire range:14 TO 30 AWG
Wire section (mm2):0.05 to 2.5mm2
Pin dimension:1mm x 0.8mm
CR:<15m ohms
IR:>109 ohms (500V DC)
Operating temp:-40°C to+110°C
Stripping length:6mm
Torque:0.5Nm
PCB holes:min 1.4mm
PCB thickness:max 2.8mm
Climactic category:40/110/21 Acc. to IEC 68-1
Materials
Housing:Polyamide 6, 6 (UL94V-0)
Clamp:Copper Alloy, Ni plated
Terminal:Copper alloy, Tin plated
Screw:M3, copper alloy, Ni plated
Colors Available:Green (MSM-open), black (MSE-closed)

Marking
Adhesive marking strips 5 and 5.08mm centers.
NumberedOrder Number
1-10ESA014000110
11-20ESA014001120
21-30ESA014002130
31-40ESA014003140
41-50ESA014004150

Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
0 = no printing
A = upside down printing (consecutive #'s R to L)
B = regular printing (consecutive #'s L to R)
Custom markings are welcome with minimum order.
Contact BECKWITH ELECTRONICS for more information.

Selection Table and Drawings