Beckwith Electronics
Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax
Contact Us
BlockMaster
Specifications
Features:
- MSB is green in color with clamp in the open position.
- MEB is black in color with clamp in the closed position.
- Double captive screws.
- Elevator clamp system.
- Testing holes/points.
- 2 to 12 position single mold.
- 2 to 36 position modular.
- 2 position blocks can be ordered with clamping pegs to reduce torque levels on the board and surpass VDE standards.
- Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
- Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
- Minimum 5 microns of tin plating on terminal for easy soldering.
|
MSB (MEB) Series 
|
MSB30A91
30 Positions
Right Angle
Marking A
5mm Spacing
| Electrical |
|---|
| Current: | 13.5A@300V |
| Wire range: | 16 to 30AWG |
| Wire section (mm2) | 0.05 to 1.5mm2
|
| Pin dimension: | 0.9mm x 0.5mm |
| CR: | <15m ohms |
| IR: | >109ohms (500V DC) |
| Operating temp: | -40°C to+110°C |
| Stripping length: | 5mm |
| Torque: | 0.5 Nm |
| PCB holes: | min 1.1mm |
| PCB thickness: | max 2.4mm |
| Climactic category: | 40/110/21 Acc. to IEC 68-1 |
| Materials |
|---|
| Housing: | Polyamide 6.6(UL94V-0) |
| Clamp: | Copper alloy, Ni plated |
| Terminal: | Copper alloy, Tin plated |
| Screw: | M3 Copper alloy, Ni plated |
| Colors available: | Green (MSB-open), black (MEB-closed) |
| Marking |
|---|
| Adhesive marking strips 5 and 5.08mm centers. |
| Numbered | Order Number |
|---|
| 1-10 | ESA014000110 |
| 11-20 | ESA014001120 |
| 21-30 | ESA014002130 |
| 31-40 | ESA014003140 |
| 41-50 | ESA014004150 |
Ink marking by factory (specify in order number):
- Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
- 0 = no printing
- A = upside down printing (consecutive #'s R to L)
- B = regular printing (consecutive #'s L to R)
Selection Table and Drawings