Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

BlockMaster


Specifications

Features:
  1. CSF is green color with clamp in the open position.
  2. Double captive screws.
  3. Elevator clamp system.
  4. 2 to 25 position single mold.
  5. Can also be side stackable.
  6. Vertical or right angle orientations.
  7. Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
  8. Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
  9. Minimum 5 microns of tin plating on terminal for easy soldering.
CSF/CSM Series

Electrical
Current:6A @300V
Wire range:16 to 30 AWG
Wire section (mm2):0.05 to 1.5mm2
Pin diameter:ø1.3mm
CR:<15m ohms
IR:>109 ohms (500V DC)
Operating temp:-40°C to+110°C
Stripping length:5mm
Torque:3.5 lb-in
PCB holes:min 1.4mm
PCB thickness:max 2.4mm
Climactic category:40/110/21 Acc. to IEC 68-1
Insertion force:max 2 N
Disconnecting force:min. 1.2N
Materials
Housing:Polyamide 6, 6 (UL94V-0)
Clamp:Copper Alloy, Ni plated
Spring:Phosphorus bronze, Tin plated
Screw:M3, copper alloy, Ni plated
Pin (header):copper alloy, Tin plated
Colors Available:Green

CSM120A01


12 Positions
Posts
Marking 0

Marking
Adhesive marking strips 5mm centers.
NumberedOrder Number
1-10ESA14000110
11-20ESA14001120
21-30ESA14002130
31-40ESA14003140
41-50ESA14004150

Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
0 = no printing
A = upside down printing (consecutive #'s R to L)
B = regular printing (consecutive #'s L to R)

Custom markings are welcome with minimum order. Contact BECKWITH ELECTRONICS for more information.

Selection Table and Drawings