Beckwith Electronics
Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax
Contact Us
BlockMaster
Specifications
Features:
- CSF is green color with clamp in the open position.
- Double captive screws.
- Elevator clamp system.
- 2 to 25 position single mold.
- Can also be side stackable.
- Vertical or right angle orientations.
- Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
- Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
- Minimum 5 microns of tin plating on terminal for easy soldering.
|
CSF/CSM Series 
|
| Electrical |
|---|
| Current: | 6A @300V |
| Wire range: | 16 to 30 AWG |
| Wire section (mm2): | 0.05 to 1.5mm2
|
| Pin diameter: | ø1.3mm |
| CR: | <15m ohms |
| IR: | >109 ohms (500V DC) |
| Operating temp: | -40°C to+110°C |
| Stripping length: | 5mm |
| Torque: | 3.5 lb-in |
| PCB holes: | min 1.4mm |
| PCB thickness: | max 2.4mm |
| Climactic category: | 40/110/21 Acc. to IEC 68-1 |
| Insertion force: | max 2 N |
| Disconnecting force: | min. 1.2N |
| Materials |
|---|
| Housing: | Polyamide 6, 6 (UL94V-0) |
| Clamp: | Copper Alloy, Ni plated |
| Spring: | Phosphorus bronze, Tin plated |
| Screw: | M3, copper alloy, Ni plated |
| Pin (header): | copper alloy, Tin plated |
| Colors Available: | Green |
CSF06001
6 Positions
Plug
Marking 0
| Marking |
|---|
| Adhesive marking strips 5mm centers. |
| Numbered | Order Number |
|---|
| 1-10 | ESA14000110 |
| 11-20 | ESA14001120 |
| 21-30 | ESA14002130 |
| 31-40 | ESA14003140 |
| 41-50 | ESA14004150 |
Ink marking by factory (specify in order number):
- Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
- 0 = no printing
- A = upside down printing (consecutive #'s R to L)
- B = regular printing (consecutive #'s L to R)
- Custom markings are welcome with minimum order. Contact BECKWITH ELECTRONICS for more information.
Selection Table and Drawings