Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax

Contact Us


Aim Electronics


Discontinued for reference only
However, we may have some left in stock

MATV/CATV SATELLITE

1GHz PROFESSIONAL SERIES AMPLIFIER FOR DISTRIBUTION SYSTEMS

Discontinued
for reference only
13-5975
30 dB Gain Distribution Amplifier

    Features
  1. The 13-5975 is a quality broadband indoor distribution amplifier designed for RF distribution systems, such as apartment complexes, hospitals, schools, hotels, etc. This amplifier is idea for those RF distribution systems whose input source is "cable drop", the output of MATV/SMATV headend, or the output of small CATV headend.
  2. Flat 30 dB operation gain.
  3. Aluminum housing for heat dissipation.
  4. AC 117v 50/60Hz.
  5. High output levels with low distortion.
SPECIFICATIONS:
Frequency Range:40-1000 MHz
Flatness:+ 1.5 dB
Gain:30 dB
Output Level:+ 46 dBMV
Gain Control:14 dB
Return Loss:12 dB
Power:16 VAC; 15 watts; 750 ma
Cross Modulation:65 db
Test Port:20 db
Hum Modulation:65 db
Composite Triple Beat:65 db
2nd Order Intermodulation:70 db
Noise Figure:6 db
1 GHz BROADBAND DROP AMPLIFIERS

(Forward and Reverse Amp)
10 dB Gain Amplifier  13-5930
20 dB Gain Amplifier   13-5932


(Forward and Active Reverse Amp)
Discontinued
for reference only
10 dB Gain Amplifier  13-5940
Discontinued
for reference only
20 dB Gain Amplifier   13-5942


(Forward Amp)
10 dB Gain Amplifier  13-5900
20 dB Gain Amplifier   13-5902

    Features
  1. Idea for long cable drops or multiple subscriber TV sets. 5 MHz to 1 GHz bandwidth and Low noise figure.
  2. Gain of 10 dB or 20 dB available with 1 dB flatness across entire bandwidth.
  3. Available in forward path only type (13-5900 and 13-5902) or forward and return path type (13-5930 and 13-5932) with passive return path or (13-5940 and 13-5942) with active return path.
  4. Both the amplifiers and power transformer connectors are "F" type, allowing the use of coaxial cable readily available.
  5. Solder back housing for 130 db RFI Shielding.
  6. Comes with 120V AC plug-in transformer.
SPECIFICATIONS:
Part Number 13-5900 13-5902 13-5930 13-5932 13-5940 13-5942
No. of Outputs one one two two two two
Bandwidth (MHZ)
Forward 50-1000 50-1000 50-1000 50-1000 50-1000 50-1000
Reverse N/A N/A 5-40 5-40 5-40 Active 5-40 Active
Gain Forward (dB) 10+1 20+1 10+1 20+1 10+1 20+1
Gain Reverse (dB) N/A N/A -0.6 -0.6 10+1 20+1
Flatness Passband (dB) +1 +1 +1 +1 +1 +1
Return Loss (dB) min. 14 14 14 14 14 14
Noise Figure (dB) 7 7 7 7 7 7
RFI Shielding (dB) 130 130 130 130 130 130
DIST. S-Mod. (dBmV) -70 -70 -70 -70 -70 -70
CTB (dBmV) -65 -65 -65 -65 -65 -65
Max Output (dBmV) +25 +30 +25 +25 +25 +30
Channel Capacity 151 151 151 151 151 151

SATELLITE//DBS INLINE AMPLIFIERS-SWITCHERS-COMBINERS

INLINE AMPLIFIERS    (Can be used with 14-4948 Power Inserter)
Sloped Gain for Long Cable Runs
12-4946  5-2050 MHz
 Bandwidth MHz 5-450MHz 950MHz 1450MHz 2050MHz
Gain (db Min) 14 15 18 20
Maximum Output 30 dBmv (12 Channel)
Noise Figure (db max) 4 dB Maximum
Operating Power 15 - 18 VDC Negative/Ground
Connectors 75 Ohm-F-Type-Female
 
ZINC DIE CAST HOUSING- COMPLETELY WATERPROOF
12-4947   5-2050 MHz
 Bandwidth MHz 5-40 50-470 470-900 950-2050
Gain (db Min) 14 16 18 20
Maximum Output 30 dBmv (12 Channel)
Noise Figure (db max) 4 dB Maximum
Operating Power 15 - 18 VDC Negative/Ground
Connectors 75 Ohm-F-Type-Female

AMPLIFIERS     (Boxed)
14-4900    25db

1 Way-25 DB Amplifier UHF/VHF/FM
Discontinued
for reference only

Covers Mild & Super Bands 54 to 890 MHz

  • Switchable FM Trap
  • 75 OHM Input & Output
  • 117 V. Power Source
  • Lightning Protection
  • Heavy Metal Case
  • On/Off Light
  • Low Noise
  • Integrated Circuit
  • Gain db 25 VHF-23 UHF
  • Noise Figure db Low 5.4 High 6.2-UHF 14
  • FM Trap Attenuation 20 db 95-108 MHz
    (Boxed)
    		•
    Discontinued
    for reference only
    14-4940    12db

    Amplifier 2 Way
    12 DB UHF/VHF/FM - 2 Outputs    		 Covers Mild Bands 54 to 216 MHz
  • 1-75 OHM Input
  • 2-75 OHM Output
  • 117 V Power Source
  • Lightning Protection
  • Heavy Metal Case
  • On/Off Light
  • Low Noise
  • Integrated Circuit
  • Gain db
        12 VHF (2 Outputs)
        10 UHF (2 Outputs)
  • Noise Figure db 6
        VHF-7.7 UHF
    (Boxed)
    		•
    14-4903    20db Cable Amp 1 GHz

    100 Channel One Set Cable T.V. Amplifier
    Discontinued
    for reference only

    For connecting 1T.V. or VCR to a single cable outlet without loss of picture quality with variable gain control

  • 20 db Gain
  • 120 VAC
  • 80 Hz -5 W
  • 50-16 Hz Band
  • Covers Mild & Super Bands
    (Boxed)
    		•
    UL LISTED AMPLIFIERS
    14-4901P    25db


    Amplifier 1 Way
    25 DB UHF/VHF/FM
    Discontinued
    for reference only

    UL Version of 14-1900
    Covers Mild & Super Bands

  • Switchable FM Trap
  • Bandwidth 54-880MHz
  • 75 OHM Input & Output
  • 117 V. Power Source
  • On/Off Light 117 volts
  • Low Noise
  • Gain 25 db-25 VHF-23UHF
  • Noise Figure db Low 5.4 High 6.2-UHF 14
  • FM Trap Attenuation 20 db 95-108 MHz
    		•
    14-4912P    10db

    1 Way VHF/FM
    Discontinued
    for reference only

    Solid State Amplifier 10 db Gain
    Bandwidth: 50 to 450 MHz
    SIGNAL BOOSTER
    Designed to boost your incoming signal. Can also be used to boost the incoming signal before you split it to multiple sets or a VCR
    14-4951    10db

    1 Way UHF/VHF/FM (Boxed)    		 Solid State Amplifier 10 db Gain
    75 OHM Input & Output
    Bandwidth: VHF  50-450 MHz
    UHF  470-900 MHz
    Noise Figure 5.5db
    14-4952    30db

    1 Way UHF/VHF/FM (Boxed)    		 Solid State Amplifier 30 db Gain
    with Adjustable Gain Control with
    FM Trap
    Bandwidth:
    VHF  50-450 MHz
    UHF   470-890 MHz
    Gain  30DB VHF
            26DB UHF
    AMPLIFIERS (MATV/VCR CATV/VCR)
    14-4910    10db

    1 Way VHF/FM    		 Solid State Amplifier 10 db Gain
    SIGNAL BOOSTER Designed to boost
    your incoming signal. Can also be used
    to boost the incoming signal before
    you split it to multiple sets or a VCR.
    14-4910P (Packaged)
    14-4911    20db

    1 Way VHF/FM    		 Solid State Amplifier
    Bandwidth 50-450 MHz (Adjustable)
    SIGNAL BOOSTER specially designed
    for Cable TV. Also covers Mild & Super
    Band with adjustable Gain Control.
    14-4911P (Packaged)
    14-4920    12db

    4 Way VHF/FM    		 Solid State Amplifier
    Bandwidth 50-500 MHz.
    Improves signal by 3 db
    Gain at each output
    SIGNAL BOOSTER you can
    tap off this four Way Amp/Splitter
    to 4 TV sets or any combination of 4
    TV sets or VCR. Small, easy to use.
    14-4920P (Packaged)
    14-4950    10db

    2 Way VHF/FM    		 Solid State Amplifier
    Bandwidth 50-500 MHz and 2 Way splitter
    5 db Gain at each output
    SIGNAL BOOSTER you can
    tap off this two Way Amp/Splitter
    to 2 TV sets or any combination of 2
    TV sets or VCR.
    14-4950P (Packaged)

    DISTRIBUTION AMPLIFIERS
    14-4943    UHF/VHF/FM

    36 db Distribution Amplifier
  • 2 Switchable FM Traps
  • Adjustment Controls
  • AC Power Indicator Light
  • 3 Wire AC Cord
  • Accessible AC Fuse
  • Band Adjustments
  • Monitor Output
  • Bandwidth:
       VHF Low 54 to 108 MHz
       VHF high 174 to 216 MHz
       UHF 470 to 812 MHz
  • Boxed

    Model 4943 is designed for medium size systems providing the user with separate VHF-Hi, VHF-Lo, and UHF band adjustment controls. The dual FM traps allow use in the strongest FM signal area. High reliability and rugged design make this amplifier ideal for the sophisticated medium to large size system.

    		•
    Discontinued
    for reference only
    14-4944    UHF/VHF/FM

    30 db Distribution Amplifier
  • 2 Switchable FM Traps
  • Adjustment Controls
  • AC Power Indicator Light
  • 3 Wire AC Cord
  • Accessible AC Fuse
  • Band Adjustments
  • Monitor Output
  • Bandwidth:
       VHF Low 54 to 108 MHz
       VHF high 174 to 216 MHz
  • Boxed

    Model 4944 is designed for medium size systems providing the user with separate VHF-Hi, VHF-Lo, and UHF band adjustment controls. The dual FM traps allow use in the strongest FM signal area. High reliability and rugged design make this amplifier ideal for the sophisticated medium to large size system.

    		•
    14-4948

    Power Inserter    		 For Inline Amplifier 12-4945, 12-4946 & 12-4947
    Input 120 V 60 Hz 7.5 Watt
    Output: 15VDC 100 MA
    (Boxed)
    14-4947    UHF/VHF/FM

    52 db Distribution Amplifier    		 Discontinued for reference only

    A step-up in Power from our Model 4943. Also additional features of switchable input attenuators, output monitor test points separate or combined inputs. Separate gain controls

  • Bandwidth:
       VHF Low 54 to 108 MHz
       VHF high 174 to 216 MHz
       UHF 470 to 806 MHz
    Boxed
    		•
     
    RF MODULATORS
    14-5641 Boxed

    RF Modulator    		 Receives Composite Audio and Video Signals from your VCR, Computer or other sources & feeds R.F. Signals to your TV Set
  • Selectible Channel 3 or 4 Output
  • Instructions Included
    		•
    14-5642 (Boxed)

    UHF Modulator
    Discontinued
    for reference only

    UHF Modulator - For use in adding VCR, Security or Satellite Channel to an Existing System. Adjustable CH 14 thru 32. Converts Composite Video and Audio Signals to UHF Frequencies