824 Horan Drive, Fenton, Mo 63026
(636) 343-6463
(636) 343-7026 fax

Abracon Corporation

Recommended Solder Reflow

Surface-Mount Products
Abracon Series	Recommended Pre-Heat Time	Recommended Reflow Temperature/Time
Ceramic Crystals, ABC, ABLS, ABM, ABMC Series Ceramic Oscillators, ASF, ASG, ASL, ASV Series Ceramic Filters, ASCF Series Ceramic SAW Resonator, Filter,ASSF, ASSR Series	60 ~ 120 sec. Max.	240°C max. for 10 sec. Max. , 2 times or 230°C max. for 80 sec. Max. , 1 time.
Plastic Molded Crystals, ABSM, ABSM2, ABS13, ABS15, ABS25 Reflowable Type Cylindrical Crystals, AB26TR, AB308TR Plastic Molded Oscillators, ASM Series	60 ~ 90 sec. Max.	240°C max. for 10 sec. Max. , 2 times or 230°C max. for 80 sec. Max. , 1 time.
All SMD TCXOs, VCTXOs, ASTX, ASVTX Series	55 ~ 70 sec. Max.	240°C max. for 10 sec. Max. , 1 times or 220°C max. for 40 sec. Max. , 1 time.
Gull-Wing HT DIP series *	55 ~ 70 sec. Max.	240°C max. for 10 sec. Max. , 1 times or 220°C max. for 40 sec. Max. , 1 time.
* Not highly recommended, Use with extreme precaution.
Solder-cream with typical melting temperature at 180°C shall be used in IR reflow method. Heating the package more than the recommended temperature may deteriorate the characteristics or damage the product.