| Standard Specifications - ASG and ASGL |
|---|
| Parameters | ASL2 | ASV2 |
|---|
| Frequency Range (Fo) | 1.544 - 85.0MHz (Higher Frequency Available) |
| Operating Temperature (TOPR) | -10°C to +70°C |
| Storage Temperature (TSTO) | -55°C to +125°C |
Frequency Stablilty
( ) | +100ppm max. (See Options) |
| Supply Voltage (Vdd) | 5.0Vdc +10% | 3.3Vdc +10% |
| Input Current (Idd) | 35mA max. for 1.544MHz < F < 32MHz (15pF)
40mA max. (50pF)
45mA max. for 32.0MHz < F < 85.0MHz
55mA max. (50pF) | 25mA max. for F < 40MHz
40mA max. for 32.0MHz < F < 85.0MHz |
| Duty Cycle or Symmetry | 40 / 60% max. @ 1/2 Vdd (See Options) |
| Rise and Fall Times (TR / TF) | 10ns max. for 1.544MHz < F < 32MHz
5ns max. for 32.00MHz < F > 85MHz |
| Output Load | 10TTL or 15pF (50pF max.) | 2TTL or 15pF |
Output Voltage
(VOH)
(VOL) |
0.9 * (Vdd) min.
0.1 * (Vdd) max. |
| Start-up Time (TOSC) | 10ms max. |
Tristate Function
(VIH)
(VIL) |
> 2.2V "1" or Open: Oscillation
< 0.8V "0": Output disabled in high impedance (Hi Z) |
| Period jitter one sigma | +25ps max. |
| * Pin 1 has internal pull-up resistor wich allows Pin 1 to be left folating (enable high). |
| A By-Pass capacitor 0.01 µF is required from Vdd and GND. |
| Environmental and Mechanical |
|---|
| Standard Markings |
|---|
| Test circuit, waveforms, |
|---|
| Recommended Handling |
|---|
| Application Notes |
|---|
| Tape and Reel (1,000 pcs / reel) |
|---|
