EAO SECME Division

DJET   Sealed toggles and pushbuttons

DJET miniature sealed switches provide dependable snap action between two fixed and one movable contact. The front face is sealed to IP68. Colored paddles and pushbutton caps are available. Heavy solid gold contacts for low levels Silver contacts for higher loads Excellent vibration and shock resistance Available as toggle and pushbutton Actuator isolated from electrical section 100,000 operations Front-face seal allows immersion up to 1 atm pressure

DJET
Description	Part Number
	Gold Contacts	Silver Contacts
1-pole toggle
matte chrome	11 17201 22	11 17271 22
matte black	11 17201 30
2-pole toggle
matte chrome	12 17263 22	12 17273 22
matte black	12 17263 30
1-pole pushbutton
matte chrome	17 17252 22	17 17282 22
matte black	17 17252 30
2-pole pushbutton
matte chrome	18 17253 22	18 17283 22
matte black	18 17253 30

Specifications
Contacts:	solid gold: 48 V/1 A max, 10 mV/100 uA min solid silver: 48 V/1 A max, 10 V/50 mA min both: <10M Ohms resistance
Dielectric strength between terminals and:	2 KV RMS, 50 Hz adjacent poles 1 KV RMS, 50 Hz, same pole 2 KV RMS, 50 Hz ground
Insulation resistance	100,000 M Ohms at ambient, 500 VDC
Operating life	100,000 operations
Vibration resistance	2000/10 Hz, 1.5 mm, amplitude
Terminals	gold plated or silver plated
Temperature	-40 to +85°C operating -55 to + 125°C storage
Damp heat	56 days (IEC 512-6)
Saline mist	96 hours (IEC 512-6)

1-Pole toggle

2-Pole toggle

1-Pole pushbutton

2-Pole pushbutton

Key Cap
	Description	Part Number
	Large cap for pushbutton Black	20 17254 01