Beckwith Electronics

824 Horan Drive, Fenton, Mo 63026
(636) 343-6463
(636) 343-7026 fax

Contact Us
Series 14
Oil & Watertight Indicators, Illuminated Pushbutton, and Two-Position Lever Switches

Features:
Sealed switches meet IP 65 and NEMA 4 and 13 specifications
Mount in 22.5mm (7/8 inch) round hole
Minimum depth: 1.18"
Front panel replacement lense and lamp
Choice of incandescent lamps/neons/multi-chip LEDs

To order:First select pushbutton or indicator desired, indicating contact and terminal type when applicable. Then order lens and illumination separately. See part ordering system to select complete (unassembled) units. Select lever actuators by action and lever, type, indicating contact and terminal type when applicable.

Order Lamps Seperately.

Series 14 Lighted Pushbuttons
(Order lens and lamp seperately)
Switch Elements Momentary
Round		 Maintained
Round
Snap Action
1-pole Form Z 14-131.0 14-271.0
2-pole Form Z 14-132.05 14-272.05
3-pole Form Z 14-133.05 14-273.05
4-pole Form Z 14-134.05 14-274.05
Low Level
2 N.O. contacts 14-431.036 14-471.036
2 N.C. contacts 14-432.036 14-472.036
1 N.O. , 1 N.C. contact 14-433.036 14-473.036
1 N.O. contact 14-435.036 14-475.036
1 N.C. contact 14-436.036 14-476.036
Note: Lens, diffuser, and front ring not supplied with basic switch. Must be ordered separately.

Select contact and terminal type where applicable .
.0
1st digit is always 0 (Case color is black)
Contact material (second digit): 1 = Silver, 2 = Gold over silver
Terminal type (third digit): 2 = 0.110" Q.C., 5 = Solder

Order Lamps Seperately.

Series 14 Lighted Indicators
(order lens and lamp seperately
Description Round
Indicator, 0.110" Q.C./Solder 14-030.002
Indicator, Solder 14-030.005
Length to match low level and Hall Effect,
Universal terminations		 14-030.006

Series 14
Flush mount adapter

704-955.0 Black Anodized
704-955.1 Brushed Aluminum

This adapter allows flush mounting pushbuttons, indicators, lever switches, and keylocks. Designed for use with both Series 04 and 14, the 2-piece adapter mounts in a standard 30.5 mm hole and maintains the front panel NEMA 4 & 13 and IP 65 sealing. Series 14 pushbuttons, short lever switches, and keylocks are suitable for use with the flush mount adapter. The low cost adapters are easy to mount and disassemble. Request Bulletin 04/14-FM, for descriptions, dimensions, mounting instructions, and ordering information regarding Series 14 flush mount switches and indicators.


Order Lamps Seperately.

Series 14 Lense/Mushroom Caps/Diffusers/Front Ring Components
Indicator Pushbutton
Lens Diffuser Front Ring Lense & Caps Diffuser
Standard Standard ** Standard Sealed Standard Extended Metal Mushroom
opaque		 Mushroom
transparent		 Standard Extended
Front Rings, Lenses,
and Mushroom Caps
in Plastic
or
Metal Lenses in
Anodized
Aluminum		 Black     704-600.0   704-602.0* 704-611.0* 704-601.0 704-604.0*   704-609.0 704-610.0
Red 704-603.2       704-602.2 704-611.2 704-601.2 704-604.2 704-614.2    
Orange 704-603.3       704-602.3            
Yellow 704-603.2       704-602.4 704-611.4 704-601.4 704-604.4 704-614.4    
Green 704-603.5       704-602.5 704-611.5 704-601.5 704-604.5 704-614.5    
Blue 704-603.6       704-602.6 704-611.6 704-601.6   704-614.6    
Clear 704-603.7 704-608.7     704-602.7 704-611.7     704-614.7 704-609.7 704-610.7
Gray     704-600.6       704-601.8        
Plastic Translucent White   704-608.9               704-609.9 704-610.9
Chrome Plated Plastic Chrome     704-600.4                
Anodized Aluminum Aluminum     704-600.1                
Nickel Chromium Steel Steel     704-600.9       704-601.9        
Silicone Cover Al Anodized Ring       704-600.3              
Silicone Cover Ni Plated Brass       704-600.2              

* Opaque plastic lenses       For extended front ring: part no. 704-600.7 (Gray plastic)


Order Lamps Seperately.

Parts Ordering System
14 - X X X - X X X - X X X X X
First (left) - Sixth Seventh Eighth Nineth Tenth Eleventh (right)
XXX
-
XXX


Pushbutton
or
Indicator
Part
Number

 Lens/Cap Style Front ring Diffuser Type Lense/Cap Color Lamp Sytle & Voltage
X Pushbutton X Style Material X   X   X  
1 Standard, Plastic 0 Standard Black Plastic 0 Black 0 Black A = No Lamp
2 Standard, Metal 1 Standard Anodized alum. 1 No diffuser
(Mushroom
or opaque
Lens)		 2 Red I = Incandescent
3 Extended, Plastic 2 Indicator Front ring not reauired 7 Clear 3 Qrange
(Standard
Lens only)		 I.0 6V
4 Mushroom Plastic, opaque* 3 Sealed Anodized aluminum
Silicone cover		 9 White 4 Yellow I.1 12V
5 Mushroom Plastic, transparent* 4 Standard Chrome plastic   5 Green I.2 24V
  5 Sealed Ni plated brass
Silicone cover		 6 Blue* I.3 30V
X Indicator 6 Standard Gray plastic 7 White** I.4 36V
1 Standard, Plastic 7 Extended Gray plastic 8 Aluminum
(Metal lens
only)		 I.5 48V
* Use extended front ring 9 Standard Steel 9 Steel
(Metal lens
only)		 I.6 60V
  * Not available in opaque mushroom cap

** Use clear lens and white diffuser

 N = Neon
N.0 110V
N.1 220V
L = LED
L.
1st digit
Voltage		 2nd digit
Color
0=6V 2=Red
1=12V 4=Yellow
2=24V 5=Green
4=48V  

Series 14 Two Position Lever Switches


Long lever switch with anodized aluminum front ring

Long Lever
Switch Element
45o Angle
Momentary
90o Angle
Momentary
Snap Action
1-pole Form Z 14-551.00 14-556.050
2-pole Form Z 14-552.050 14-557.050
3-pole Form Z 14-553.050 14-558.050
4-pole Form Z 14-554.050 14-559.050
Low Level
2 N.O. contacts 14-565.0360 14-570.0360
2 N.C. contacts 14-566.0360 14-571.0360
1 N.O. , 1 N.C. contact 14-567.0360 14-572.0360


Short lever switch with anodized aluminum front ring

Short Lever
Switch Element
45o Angle
Momentary
90o Angle
Momentary
Snap Action
1-pole Form Z 14-501.00 14-506.050
2-pole Form Z 14-502.050 14-507.050
3-pole Form Z 14-503.050 14-508.050
4-pole Form Z 14-504.050 14-509.050
Low Level
2 N.O. contacts 14-515.0360 14-520.0360
2 N.C. contacts 14-516.0360 14-521.0360
1 N.O. , 1 N.C. contact 14-517.0360 14-522.0360

Select contact and terminal type where applicable.
.00
1st digit is always 0 (Case color is black)
Contact material (2nd digit): 1= Silver, 2 = Gold over silver
Terminal type (3rd digit): 2 = 0.110" Q.C., 5 = Solder
4ht digit is always 0 (Lever color is black)