Beckwith Electronics


824 Horan Drive, Fenton, Mo 63026
(636) 343-6463
(636) 343-7026 fax

Contact Us



EAO Switch



Series 04 Emergency Pushbutton Actuators
Order contact blocks speerately. To assure proper contact seperation under all conditions, slow make/slow break contacts should be used. Up to two contact blocks can be mounted.
Description (Includes mounting flange) Part Number
Gray plastic front ring
red plastic mushroom cap with arrows		 704-074.2
As above with legend
STOP in place of arrows		 704-074.3
Anodized aluminum ring
red plastic mushroom cap with arrows		 704-075.2
As above with legend
STOP in place of arrows		 704-075.3






NEW "FOOLPROOF"
Emergency Pushbutton Actuator
Meets important EN 418 directive

EAO emergency stop switches meet Euro-Community EN 418 directive. The design prevents "teasing" the pushbutton actuator which can result in premature contact operation and eliminates the possibility of blocking the pushbutton operation by lodging foreign bodies behind the actuator. Note: To prevent rotation of the emergency stop switch, a special panel punch is available; see page 93 in the "Accessories" section.
Description (Includes mounting flange) Part Number
Foolproof emergency pushbutton actuator
Yellow actuator, red plastic mushroom cap
with white arrows		 704-064.2




Series 04 Enclosure

Bright yellow front enclosure is sealed to NEMA-4 & 13 and IP 65. Enclosures are particularly suited for use with emergency stop switches and include a ground terminal. Legend plate and cable feed thru seal are available.
Description Part Number
Enclosure, 3.27 x 3.27 x 2.32 inches 704-944.33
Legend plate marked "Emergency Stop"
Supplied with adheasive backing to seal against panel
    90 mm diameter
    60 mm diameter		 704-963.1
704-963.6
Cable feed-thry seal 61-948.18